PRODUCT DESCRIPTION

It is a bare stone wool plate produced for areas that require compressive strength and require load bearing, sound insulation, vibration and fire resistance.

APPLICATION AREAS

It is used for the floors of the buildings, floors between floors and under the vibration source base for the purpose of heat, sound and vibration insulation.

APPLICATION PRINCIPLES

Plates placed on the floor are bonded to the lateral walls of the floor up to the height of the leveling concrete to prevent vibration transfer. Before the trowel coating is poured, it should be covered with a polyethylene fabric. When it is supported with wire and reinforcements (PP fiber), a layer without shrinking cracks will be obtained. Then the application is completed by covering the desired flooring material.

Technical Table

All our products are adaptable and can be customised on request in density, thickness, size and coating with a minimum order.

 

Density

Thickness

Size
(mm x mm)

In-Pack Pieces

m²/Package

40

30

600 x 1200

15

10.80

1.666

2.833

40

40

600 x 1200

12

8.64

1.250

2.125

40

50

600 x 1200

8

5.76

1.000

1.700

40

60

600 x 1200

8

5,76

833

1.416

40

70

600 x 1200

6

4.32

715

1.214

40

80

600 x 1200

6

4.32

625

1.063

40

100

600 x 1200

4

2.88

500

850

40

120

600 x 1200

4

2.88

416

700

50

30

600 x 1200

15

10.80

1.666

2.833

50

40

600 x 1200

12

8.64

1.250

2.125

50

50

600 x 1200

8

5.76

1.000

1.700

50

60

600 x 1200

8

5.76

833

1.416

50

70

600 x 1200

6

4.32

715

1.214

50

80

600 x 1200

6

4.32

625

1.063

50

100

600 x 1200

4

2.88

500

850

50

120

600 x 1200

4

2.88

416

700

70

30

600 x 1200

15

10.80

1.666

2.833

70

40

600 x 1200

12

8.64

1.250

2.125

70

50

600 x 1200

8

5.76

1.000

1.700

70

60

600 x 1200

6

4.32

833

1.416

70

70

600 x 1200

6

4.32

715

1.214

70

80

600 x 1200

5

3.60

625

1.063

70

100

600 x 1200

4

2.88

500

850

70

120

600 x 1200

4

2.88

416

700

Reminders on Loading, Unloading, Transport and Storage:
 
• It should be done in closed areas in rainy weather.
• Stretch the canvas even when hey are shipped for short distances
• It should be stored in the package and the damaged package should not be used.
• Packages should not be stacked on top of each other
• The products are not be stepped on or used as a step.
• Before pulling with rope, hard cardboard with dimensions of 50x20 cm size should be placed under the rope.
• Storage area should be closed to prevent leakage during rain, flooding etc.
• The storage floor must be flat and non-slippery
• Loading and unloading should be done with the roof crane.
• Plates should be carefully transported to the application area by two persons.
• Before pulling the rope, 50x20 cm hard cardboard should be placed under the rope.
• The storage floor must be flat and non-slippery

BACK